What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 29.06.2025 12:50

so, what happens?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Upvotes:
Do narcissists love their children?
a photo is worth a thousand words.
It seems Mohan does not understand the difference between a comment and an Answer.
At one ohm, the resistor has a maximum of 1 watt power.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Why do Indian guys love Russian girls?
One
This is where this question deviates from being a 'generic' question, and becomes more specific.
But… the neutral is now “floating” because of the 1 ohm resistance.
Six killed by Israeli gunfire near Gaza aid site, Hamas officials say - BBC
He then asserts :
First Sentence:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Here is a simplified AC power diagram.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This one hit behind the barn.
There are three different concepts here that are getting confused.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
A circuit breaker is similar, but is resettable.
The Law Firms That Appeased Trump—and Angered Their Clients - WSJ
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
but this device (an Inductor) … impedes the rapid changes in the current.
One is “what exactly is in a ‘surge protector’ ? ”
Horoscope for Tuesday, June 03, 2025 - Chicago Sun-Times
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
[image of Common-mode choke]
This device then solves the entire problem.
Do ya think Taylor Swift worships the devil?
The MOV will conduct when the voltage exceeds 50% of line voltage.
but I think this circuit , shows a few more pieces.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Edit 2024–10.
These devices are installed between the “hot” and “neutral” and protective ground.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Can we state Alia Bhatt as the most versatile actress in Bollywood now?
what exactly is a ‘surge’ protector?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
I post the exact comment here.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
In schematic diagrams this is the symbol for a fuse:
eight
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It also is a device that limits the change in current flow.
2024–10–14 [Omar Gharbi Omar Gharbi ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Now when you have a certain ac resistance, then a current flows in a loop.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
For this case there are devices called Metal oxide varistors (MOV).
Barnstars:
These are simplified answers to the original question, and does not change anything I wrote above.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
nine
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where the MOV conducts again, and dissipated the energy.
But it can get overloaded, and no longer works.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The third is lightning and “how it gets conducted into a home.”
the problem then depends on "how fast does the fuse operate?".
There are two important concepts here.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
He then describes the function of a fuse.
The other is “what does a “fuse” do?”
What does a fuse do?
2024–10–16 [ OO OLAOYE OYEBODE ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then describes Rainy Season and Lightning.
(Dc diagram shown, AC is similar).
What is lightning?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
An AC voltage/ current source, and an ac inductive load.
At least they know the answer if they wanted it.
This is 'the assistant's answer'
A fuse is a non-resetable over current circuit protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Because the load is inductive, the current lags the voltage.(by a bit).
[old diagram got deleted by accident]